Assetto Corsa Competizione (PS4) - Fanatec Recommended Settings

Dominic BrennanDominic Brennan Member, Administrator
edited December 2021 in Assetto Corsa

General Notes:

  • The settings below are considered to be reasonable baseline values for Assetto Corsa Competizione (PS4). They might not suit all tastes and driving styles, but they are a good starting point.
  • In order to apply the suggested settings correctly, it is important to assign both the Tuning Menu values AND the suggested In-Game settings together.
  • For the Podium Series settings, it is assumed that the Torque Key is being used.
  • For wheels with Multi-Position Switches, the 'Encoder' mode is supported (wheels with the encoder option can be left on Auto). The full multi-position input (constant/pulse) only works on the PC version of ACC.
  • The in-game Force Feedback 'Gain' setting has the biggest impact on signal strength (and clipping). Reasonable default values have been suggested below, but the signal will vary depending on the car, car setup, tyre condition, track condition, etc. It can be useful to check the 'FF' meter in the HUD while driving to fine-tune the Gain setting to avoid too much clipping.
  • Due to the latency caused by the 30fps target on the PS4 version of ACC, the force feedback is prone to oscillation. This behaviour can be mitigated by reducing overall Force Feedback strength (both the FF setting in the Tuning Menu, and the Gain setting in-game), increasing the Natural Damper, Friction, and Inertia (DD1 PS4), running lower/negative Drift values (CSL Elite WB+). Reasonable values are suggested below, but this is worth experimenting with.
  • 1-to-1 rotation of the steering wheel currently requires manual adjustment of 'SEN' per car. The easiest way to do this is to bring up the 'SEN' setting, rotate your steering wheel through 180 degrees (while stationary in the car), and then adjust the SEN via the FunkySwitch/D-pad until the in-game steering wheel aligns with yours.
  • Ensure you are using the latest wheel base firmware.


Podium Racing Wheel F1® PS4™ (PlayStation Compatibility Mode)

Tuning Menu Settings:

  • SEN Manual adjustment per car
  • FF 38
  • FFS Peak
  • NDP 38
  • NFR 3
  • NIN 25
  • INT 2
  • FEI 100
  • FOR 100
  • SPR 100
  • DPR 100
  • BLI User Preference
  • SHO 100
  • BRF User Preference

In-Game Settings:

  • Steer lock: 1080
  • Gain: 60
  • Min Force: 0
  • Dynamic Damping: 100
  • Road Effects: 0


CSL Elite Wheel Base +

Tuning Menu Settings:

  • SEN Manual adjustment per car
  • FF 100
  • SHO 100
  • BLI User Preference
  • DRI -05
  • FOR 100
  • SPR 100
  • DPR 100
  • BRF User Preference
  • FEI 070

In-Game Settings:

  • Steer lock: 1080
  • Gain: 70
  • Min Force: 0
  • Dynamic Damping: 100
  • Road Effects: 0


Gran Turismo DD Pro (PlayStation Compatibility Mode - Purple LED)

  • SEN Manual adjustment per car
  • FF 100
  • FFS Peak
  • NDP 25
  • NFR 5
  • NIN Off
  • INT 6
  • FEI 100
  • FOR 100
  • SPR 100
  • DPR 100
  • BLI User Preference
  • SHO 100
  • BRF User Preference

In-Game Settings:

  • Steer lock: 1080
  • Gain: 70
  • Min Force: 0
  • Dynamic Damping: 100
  • Road Effects: 0


«13

Comments

Sign In or Register to comment.