Question about screws for the base and pedals

Dustin NünlistDustin Nünlist Member
in Wheel Bases (and Racing Wheels)

My wheel was delivered 🙏🏼

➡️ Fanatec GT DD PRO

Question... What screws (and what length) are needed to attach the base and pedals to the Playseat Trophy racing seat❓

Comments

  • Jack PickettJack Pickett Member
    edited January 20

    The online manuals will tell you the metric diameter/thread pitch and maximum length into the base and pedals then you add length for the rig

  • Stephen JayStephen Jay Member
    edited January 20

    It does say in the manual but for the wheelbase they're M6 - 10mm + the thickness of the mounting plate. Assuming your wheeldeck is about 3mm If you get 15mm they'll be fine with washers. The amount will depend on how many t-nuts you'll be using.

    For the pedals the rears are M8, 25mm + 2 washers and a nyloc nut for each pedal. For the front of the pedals under the heel plate you need two M6 - 22mm + thickness of the mounting plate, so once again assuming the pedal plate is about 3mm then you need 25mm bolts.

Sign In or Register to comment.