Maurice, i have always use your profiles but always changed the sensitivity to 900 because everybody says its better, why is that you choose to do the profiles with 1080
Hello, the leds for pitlane have not been working for a while on iracing, how to make it work. the same for the vibrations of the steering wheel when you have to change gear. Thank you in advance for your help.
For Pitlane LEDs you are right, they currently dont work in iRacing.
For the Rev Limiter Vibrations you most likely need to adjust the % value. Also make sure that you have SHO set to ON in the Tuning Menu. Just tested and when the % value is correct and SHO is set to ON then it works fine.
I would suggest you use my profiles, they are fine-tuned for every car with 100% synced LEDs and vibration shift values. See page one, first answer for most recent package.
Or you try it by yourself and invest hundreds of hours into finding the correct RPM values :D
The LED settings can be used with ANY base. Only the Tuning Menu settings are for Podium DD only.
You can still import my profiles just fine. Just make sure you only check the boxes for "LED" and "Vibration" in the "Load" box, then click "Load" and then only the LED and Vibration settiings get loaded without loading the Tuning Menu settings and then you will have 100% perfectly synced LEDs and Vibration settings. For the Steering Wheel vibration you only need to make sure to set "SHO" to ON in the TUning Menu then.
For the EA LAuncher version you need to select "Launch game via manually selected executable" on the Main Tab on the F1 23 entry. Then select the exe file of the EA Launcher version and then it will work.
it still does not work for the vibrations of the steering wheel, on the other hand the pedalier yes. It's not a problem with the steering wheel, when I do the tests in fanatec, it works well
I've been having this problem for a while, it still doesn't work, does anyone have a solution? in fact it's all the steering wheel vibration options that don't work
Comments
I was wrong this doesn't work
Then I have no idea.
Its working fine for me...
Can you share a picture of the in game telemetry page?
thanks maurice this is great
Maurice, i have always use your profiles but always changed the sensitivity to 900 because everybody says its better, why is that you choose to do the profiles with 1080
No difference between 900 and 1080 when using the same value in game.
Choose whatever you prefer, I prefer 1080 as 900 is "oldschool". :D
ok thanks
Hey Mauice.
thanks for the nice profiles.
The LEDs are not matching the ingame LEDs of the 296 Ferrari. All other cars i tried are fine.
Is it my fault? Any idea?
Thank you!
Can you share a picture of the LED Tab when the profile is loaded? For me it's matching 100%... 🤔
Should look like this. Just tested and these values are definitely 100% in sync with the in-game LEDs.
now it works, i re-imported the profile... dont know why it was a wrong profile. anyway.. thx for your quick reply
Hello, the leds for pitlane have not been working for a while on iracing, how to make it work. the same for the vibrations of the steering wheel when you have to change gear. Thank you in advance for your help.
For Pitlane LEDs you are right, they currently dont work in iRacing.
For the Rev Limiter Vibrations you most likely need to adjust the % value. Also make sure that you have SHO set to ON in the Tuning Menu. Just tested and when the % value is correct and SHO is set to ON then it works fine.
SHO ?
and for the exact leds as on iracing, what is the setting? thank you very much for the responsiveness
Yes.
When this toggle is set to off then of course the vibration motors are not working... ;)
do you have to activate a parameter on iracing for it to vibrate?
No, just the SHO setting in the Tuning Menu.
I had already activated it
THen the % value is not correct and you need to adjust it to match the Shift point of the car.
what percentage did you put it at?
Depends on the car you drive, every car has a different shift point.
for the regime leds, I want it to be like on iracing, how can I do?
I would suggest you use my profiles, they are fine-tuned for every car with 100% synced LEDs and vibration shift values. See page one, first answer for most recent package.
Or you try it by yourself and invest hundreds of hours into finding the correct RPM values :D
I worry with your profile, is that I have a csl dd and it will not work?
I bought the game F1 23 on the EA platform. How can I open it in fanalab and it is empty?
The LED settings can be used with ANY base. Only the Tuning Menu settings are for Podium DD only.
You can still import my profiles just fine. Just make sure you only check the boxes for "LED" and "Vibration" in the "Load" box, then click "Load" and then only the LED and Vibration settiings get loaded without loading the Tuning Menu settings and then you will have 100% perfectly synced LEDs and Vibration settings. For the Steering Wheel vibration you only need to make sure to set "SHO" to ON in the TUning Menu then.
I'm testing this, thank you for your help.
For the EA LAuncher version you need to select "Launch game via manually selected executable" on the Main Tab on the F1 23 entry. Then select the exe file of the EA Launcher version and then it will work.
it still does not work for the vibrations of the steering wheel, on the other hand the pedalier yes. It's not a problem with the steering wheel, when I do the tests in fanatec, it works well
Do you use BLI? Steering Wheel vibrations are not compatible with BLI at the same time, so when using BLI then SHO no longer works.
That would be the only reason I can think of. Otherwise I have no idea as it's working fine for me so must be something with your settings for sure...
I've been having this problem for a while, it still doesn't work, does anyone have a solution? in fact it's all the steering wheel vibration options that don't work