I upgraded my 2.01.12 ver fanalab to 2.01.21 and it works fine. then I tried to upgrade to 2.01.45 again and my wheel led stopped works again. going back to 2.01.21 solved the problem.
just a quick question regarding the profiles for iracing for the DD2. You mention 15Nm for the "Wheel force" but the DD2 has 25Nm. What is the reason for the 15Nm? THX in advance for your feedback
Thanks for your feedback and yes, your answer makes sense :)
I managed to get it right yesterday, the reason was also that my steering wheel oscillated like hell with the Dallara, but I finally solved that with the dynamic damping. However, another phenomenon occurred that I have not yet solved. The DD2 refused to work while driving (iRacing) for no reason at all and I flew off on the track. The FFB suddenly disappeared, the car drove in a different direction and immediately afterwards the DD2 gave out so much power that I had to switch off the DD2 via the killswitch. I have the latest drivers on both the DD2 and FanLAB. Do you have any idea what this could be?
Hey Maurice - I recently started playing LMU, and just wanted to say thanks...your profiles are working great for me (DD1, 455)!
One tidbit - in the instructions txt file you provide, you mention setting car-specific feedback for the Toyota. I don't think this option is available in LMU any more (or possibly I'm a dope and can't find it). The profile for the car still works well for me, though, so thanks again!
Then you did not properly followed the steps the Enable the Telemetry and FanaLab support and disable the native ingame LED support by clicking the two green buttons in the game profile Tab in FanaLab so there was some interference of the native LEDs with the Lab LEDs which can lead to numerous weird issues.
As I said, when you properly disable the native LED support by the game and properly enable FanaLab support then the LEDs are independent of any driver and firmware as it is just the Lab which then controls them.
Hi everyone, can anyone explain to me what happened? It always worked, but then it stopped and now it's like this. I have installed and uninstalled everything several times but it doesn't work anymore. Can anyone help me? Thank you
Ciao Maurice, non ho capito cosa intendi per abbinamento personalizzato. Gioco solo a iRacing. Guarda, sto aggiungendo altri due screenshot. Cosa devo fare esattamente?
I (and many others) dont understand this language. Please post in English according to the forum rules.
I have no idea what you want to show with the new pictures. This shows that you have a profile mio.pws loaded which you had saved in the iRacing category. The exclamation mark means you are currently in a different game.
After you loaded that profile, were the LED and Dynamic Damping pages accessible again or still empty?
Please note that such pages only show stuff when a profile of a supported game is loaded and when you dont have a custom game running atm. As soon as a custom game is running or a profile of a custom game is loaded, then such pages intentionally show nothing because those stuff is not supported for custom games.
I would suggest at this point that you uninstall the Fanatec driver, FanaLab and then completely redownload and reinstall everything from scratch to get a fresh start.
Thank you very much for the answers but, I repeat again, I only play iRacing and nothing else. It always worked, always. It's been like this since this morning. I have uninstalled and reinstalled many times. I did a thorough cleaning of the registry but nothing. It doesn't work anymore. Thanks for answering me, but I think you don't understand the problem. Thanks anyway
Why do you have tons of Custom Games then when you only play iRacing?
In this case I suggest you delete the whole settings and xml folder in C:\Users\YOURUSERNAME\AppData\Local\Fanatec\FanaLab to delete basically everything and start from scratch.
There should be an update in 1-2 weeks which then (hopefully) includes ALL the new iRacing cars with also the McLaren 720S GT3 EVO and also the new DTM 1995 cars in R3E.
I have a question about fanalab and Raceroom i played it after the new update but when i start a race and i will drive away from the pits there is a raw feeling in my cs dd wheel it makes a strange sandy noise but when i am out of the pit lane it is gone and the ffb works again. can some one explane?
Comments
I upgraded my 2.01.12 ver fanalab to 2.01.21 and it works fine. then I tried to upgrade to 2.01.45 again and my wheel led stopped works again. going back to 2.01.21 solved the problem.
Hi Maurice,
just a quick question regarding the profiles for iracing for the DD2. You mention 15Nm for the "Wheel force" but the DD2 has 25Nm. What is the reason for the 15Nm? THX in advance for your feedback
BTW, THX for your great service to us!
BR
Ralf
Reason is because I use FFB strength of 60% which equals 15 Nm ;)
Thanks for your feedback and yes, your answer makes sense :)
I managed to get it right yesterday, the reason was also that my steering wheel oscillated like hell with the Dallara, but I finally solved that with the dynamic damping. However, another phenomenon occurred that I have not yet solved. The DD2 refused to work while driving (iRacing) for no reason at all and I flew off on the track. The FFB suddenly disappeared, the car drove in a different direction and immediately afterwards the DD2 gave out so much power that I had to switch off the DD2 via the killswitch. I have the latest drivers on both the DD2 and FanLAB. Do you have any idea what this could be?
Ralf
Hello Maurice,
The leds on my Fanatec wheel don't work since the last driver update, in other games like Automobilista 1&2 etc they do work.
Does anyone have the same problem or solution?
I updated yesterday Fanalab to 2.01.45 and according to the change log "Fixed high occurence of missed shifts when FanaLab is running."
This is unfortunately not true as I have frequently issues that it does not up or downshifts in Iracing. Afaik everything is updated, there is no
newer firmware etc.
Podium DD1, F1 V.2 wheel
Then it is firmware related and no longer Lab related. Please report in the driver Feedback thread.
Hey Maurice - I recently started playing LMU, and just wanted to say thanks...your profiles are working great for me (DD1, 455)!
One tidbit - in the instructions txt file you provide, you mention setting car-specific feedback for the Toyota. I don't think this option is available in LMU any more (or possibly I'm a dope and can't find it). The profile for the car still works well for me, though, so thanks again!
Hello
I have a fanatec v2.5 8Nm and i want to know what to do for use the setting of maurice correctly with this base.
What modification or calcul i need to do ? Because with the Lamborghini for exemple I find the force feedback quite weak.
Hey Maurice,
I installed the previous driver and now the LEDs are working again....so...something wrong in the update after all?
LEDs with FanaLab are completely independent from any driver and firmware.
That may be true but then can you explain to me why the LEDs do work again with the previous driver?
Seems to me it has something to do with the new driver....
But anyway after installing the old driver it works, whatever the reason.
Then you did not properly followed the steps the Enable the Telemetry and FanaLab support and disable the native ingame LED support by clicking the two green buttons in the game profile Tab in FanaLab so there was some interference of the native LEDs with the Lab LEDs which can lead to numerous weird issues.
As I said, when you properly disable the native LED support by the game and properly enable FanaLab support then the LEDs are independent of any driver and firmware as it is just the Lab which then controls them.
oh.. got it. we, the people who have problem with the leds on most recent build, we are dumb.. not able properly install FanaLab.
we were able to put all earlier versions to work, but the newest one... we are not.
thank you very much for your answer.
cheers
You had a custom game loaded where only Tuning Menu is supported, nothing else.
Load a profile of a supported game and then all the settings will be available again.
I (and many others) dont understand this language. Please post in English according to the forum rules.
I have no idea what you want to show with the new pictures. This shows that you have a profile mio.pws loaded which you had saved in the iRacing category. The exclamation mark means you are currently in a different game.
After you loaded that profile, were the LED and Dynamic Damping pages accessible again or still empty?
Please note that such pages only show stuff when a profile of a supported game is loaded and when you dont have a custom game running atm. As soon as a custom game is running or a profile of a custom game is loaded, then such pages intentionally show nothing because those stuff is not supported for custom games.
I would suggest at this point that you uninstall the Fanatec driver, FanaLab and then completely redownload and reinstall everything from scratch to get a fresh start.
Why do you have tons of Custom Games then when you only play iRacing?
In this case I suggest you delete the whole settings and xml folder in C:\Users\YOURUSERNAME\AppData\Local\Fanatec\FanaLab to delete basically everything and start from scratch.
Good morning,
is there a way to label the setups in Fanalab?
I use 1 for wrc, 2 for FM, 3 for ACC etc etc
thanks
No.
You can only save profiles with whatever name you want, so naming the profiles itself is not needed anyway.
Hey all,
Is this latest Fanalab compatible with 455 driver ?
Yes
Hey Maurice,
Is it possible for me to add the new BMW M4 G82 GT4 to Fanalab myself so it will auto-load the profile in iRacing?
If not, do you have an ETA on the next update?
Thank you!
No, you cant do that.
There should be an update in 1-2 weeks which then (hopefully) includes ALL the new iRacing cars with also the McLaren 720S GT3 EVO and also the new DTM 1995 cars in R3E.
I have a question about fanalab and Raceroom i played it after the new update but when i start a race and i will drive away from the pits there is a raw feeling in my cs dd wheel it makes a strange sandy noise but when i am out of the pit lane it is gone and the ffb works again. can some one explane?
Thats an issue of the game where the DPR channel is constantly triggered by the game.
You need to disable DPR to not get this grainy feeling. If already set to OFF then you need to set it to 10 and then back to OFF.
Not FanaLab related at all though.
thanks maurice for your help, i will try it but when i put the base in yellow mode instat of pc mode it is also gone
Hi There,
Just installed fanalab and imported all maurice's profiles for Iracing succesfully.
But what settings do i Put my Stearing wheel to ?
Do I leave it in automatic mode or custom mode or even advanced mode ?
cant find any information on this and it kind of confuses me.
Using a DD+ and a F1 V2.5 steering wheel