Well in theory but when You add lower start-stripe of windows that is what covers "load" button in latest version of fanalab, earlier it (and all icons in lower part of fanalab window) was bit higher so that wasnt a problem. Anyway why that have to be so big window for fanalab, it have just game icons on main screen and so much empty space on other pages?
I have orders the new csl dd 12nw base. What are the settings in the games? Can you use the same settings as the dd pro 8nm in acc f1 23 Ams2 ed. I use the profiles in fanalab from Maurice with the dd pro settings from Fanatec.
I'm having an issue with the shift lights on my CSL Elite. None of the lights work except the last one. The last light lights up around where the first 3 should and goes off when the red should start. I've had the issue in ACC, AC, rF2, RaceRoom, and PC2.
Simply shutting down the PC gives us now possibility to save any settings... It has to be closed with the X button, only then the current settings (ALL of them) get saved into a CurrentSettings.xml file to restore them the next time you open the Lab.
Hmm, interesting. I did close Fanalab with "X" so see if settings would be saved, and they were. But next day they were back to something random, not sure I think only some setting stayed as I configured.
I made LED profiles for each car I drive in ACC, and I just use default Fanalab LEDS for games like RaceRoom. Works as expected when it begins to light up, but beyond that there's nothing. Also when I set the first LED to 0 the last one comes on, and when I set the first red or blue LED to 0 with the first still set to 0 the last goes off. The LED test does work outside of a game, but it acts weird when I'm in the pitlane in ACC for an example. I have pitlane and limiter lights set but its just completely dark with those.
You need to remove the QR2 and either install the old QR1 to use with the update cable or if you already sold the QR1 then you need to connect the wheel with no QR attached, just be careful with the pins.
So I updated Fanalab and I use Maurice profiles. However I am due to receive soon the Clubsport DD wheelbase. Are the Maurice profiles compatible with this new wheelbase please?
Comments
HI,
All posts about drivers :
Well in theory but when You add lower start-stripe of windows that is what covers "load" button in latest version of fanalab, earlier it (and all icons in lower part of fanalab window) was bit higher so that wasnt a problem. Anyway why that have to be so big window for fanalab, it have just game icons on main screen and so much empty space on other pages?
Hello. Just updated Fanalab and now my LED lights on my PBME are not working like they did.
My setup before update…
red lights = when I’m in pit lane. These are always on until I leave pit lane
blue light = pit limit indicator. I press it when I come/leave pit lane
However now when I press pit limiter, the red lights go off immediately
appreciate any help 🙏
My Fanalab settings below…
good evening
When i start F1 23, i have no telemetry.
I clicked the two green buttons, but nothing works.
Fanatec DD1 with the clubsport F1 2018 wheel.
Fanalab 2.01.12
Thats an issue of the current TrayApp included in driver 454.
Please close the TrayApp, then Telemetry through FanaLab is working again in F1 23.
it worked, Thanks!!
I have orders the new csl dd 12nw base. What are the settings in the games? Can you use the same settings as the dd pro 8nm in acc f1 23 Ams2 ed. I use the profiles in fanalab from Maurice with the dd pro settings from Fanatec.
I think you mean the CS DD as there is no CSL DD 12 Nm?
For that one there are recommended FFB profiles for some games included in FanaLab 2.01.12 with more games to follow later.
In the end they are still just recommendations. YOU have to feel comfortable with the FFB so it's all up to you to fine-tune it to your liking.
Yeah accactly I bought the cs dd😊
But I mean the INT NIN and FOr settings. Are they the same
As I said, for some first games there are recommended FFB profiles included in FanaLab with recommended settings for exactly those settings.
They are different from CSL DD and GT DD as the CS DD is a different beast.
This are my settings for LEDs on V2.5 wheel.
In 1.69 version this meant when in pitlane and pit limiter is on top LEDs are green and side one red, if i turn pit limiter off top LEDs go to red.
In this version when pit limiter is on my side LEDs are no longer red, until i turn pit limiter off.
Is there some fix for this or do I go to previous release?
Also another issue is that when Im in garage/menu my LEDs are ON while in previous releases were OFF.
(I only played rFactor 2)
Thx for the report. It is under investigation, no fix yet.
Ah okay this is the same issue I am having with mine. Glad it’s not just me….Ive been going crazy all day 🤦🏻♂️
I'm having an issue with the shift lights on my CSL Elite. None of the lights work except the last one. The last light lights up around where the first 3 should and goes off when the red should start. I've had the issue in ACC, AC, rF2, RaceRoom, and PC2.
Are they working in the driver LED test?
If yes then the LEDs in general work fine and you use wrong RPM (or %) values which you need to change so they match the car you drive.
For your usecase I suggest you use % mode instead of RPM as % is more likely to work universally for each car which RPM just cant do.
Ah, ok, thanks Maurice
Mine is not a bug but just a request. is it possible to implement a profile for ETS2/ATS to get speed or other information? Thank you.
This is on the list of possible future game implementations, yes, but currently not being worked on.
So yes, it might come sometime in the future but it wont come anytime soon.
I also have issue with settings not saving across reboots. Mainly display and vibration settings. Also "RPM flash" is not flashing red after reboot.
+1!
Did you closed Fanalab with the "X" Button?
Or simply shut down your PC?
Simply shutting down the PC gives us now possibility to save any settings... It has to be closed with the X button, only then the current settings (ALL of them) get saved into a CurrentSettings.xml file to restore them the next time you open the Lab.
Hmm, interesting. I did close Fanalab with "X" so see if settings would be saved, and they were. But next day they were back to something random, not sure I think only some setting stayed as I configured.
I made LED profiles for each car I drive in ACC, and I just use default Fanalab LEDS for games like RaceRoom. Works as expected when it begins to light up, but beyond that there's nothing. Also when I set the first LED to 0 the last one comes on, and when I set the first red or blue LED to 0 with the first still set to 0 the last goes off. The LED test does work outside of a game, but it acts weird when I'm in the pitlane in ACC for an example. I have pitlane and limiter lights set but its just completely dark with those.
+1 same issue. Leds test works fine.
Hello,
How can i update firmware for the BMW M4 wheel when QR 2 is installed? The cable is made for QR1, i am scared the damage the pins.
You need to remove the QR2 and either install the old QR1 to use with the update cable or if you already sold the QR1 then you need to connect the wheel with no QR attached, just be careful with the pins.
However.. This is not FanaLab related.
So I updated Fanalab and I use Maurice profiles. However I am due to receive soon the Clubsport DD wheelbase. Are the Maurice profiles compatible with this new wheelbase please?
Put FFB to 100 for every profile, then they are, more or less, compatible.
Sorry wrong topic thanks for help.