Hi, could anyone share an AC RSS Formula Hybrid 2023 profile? For DD1/2 would be perfect.
One thing also, I find that with the recommended settings for AC, this F1 car, is way softer than any car on ACC. Is it normal? is because it does not have a custom profile? Thanks.
Has anyone had any success with the CSW 2.5 and having the Fanatec app work with this version? I am now getting a blank ip address when right clicking on the tray icon. I can see the ip address of my PC when it auto-discovers, but have not been able to get anything to work with iRacing
Please report issues with the app in the respective thread as its not FanaLab related.
The current TrayApp version v0.43.0.21 is known to not get telemtry data in iRacing. Its under investigation and will be fixed hopefully with the next version.
Hey guys, I updated to this latest fanalab + latest drivers and have a couple of issues:
1) On the IOS app, the shift light used to turn blue when hitting 100%, but now it doesn't do it anymore. Anyway to fix that?
2) I used to have FLAG LEDs in the LED tab in fanalab. Was this featured deleted?
3) On my Porsche steering wheel (DD1), I used to be able to control the flashing of the LEDs (set to %) when hitting close to 100%, but now it seems to flash super quickly when hitting rev limiter even if I put a 750ms flashing interval. Any ideas?
Tried to add BeamNG as a custom game to Fanalab. Tried the exe file launch and detection method, but when I press the add button the dialog just closes and the custom game does not appear. is there a trick to this or does Fanalab not recognise BeamNG as a game title?
I have a problem with the activated OSD of GPU Tweak III since this fanalab version. I use the OSD of GPU Tweak III to display some parameters of my 4070 in iRacing. When the OSD switch is "ON" I can start fanalab normally, but as soon as try to move the window, try to resize it or switch through the tabs, fanalab crashes immediatly. When I turn off the OSD switch in GPU Tweak III, fanalabs is working as usual.
I tried this with all other apps I'm using, but only fanalab is crashing with activated OSD in GPU Tweak III.
I just updated fanalab and now I have a problem. I use screen resolution 4K 3840x2160 and newest fanalab doesnt fit to that, I can't see lower part of window, so I cant click "load" button game profile. I tried to set larger resolution of screen then drag lower part of window, but it looks that its impossible, I can make it only bigger, but I cant make it smaller. Old version worked with that resolution.
Maurice, I did recent reformat and installed newest driver version along with newest Fanalab. I followed usual settings regarding .xml to have car recognized when I pick it and profile changed. For some reason it does not seem to work for me now. Any idea how I can trouble shoot this, would greatly appreciate.
Hello, I Have problems With CSL Universal hub v2, I Updated the Fanalab and the LED Page is now empty, and the leds are not working on my CSL Universal Hub. I switched back to the prev. version witch was 2.00.09 and now is working. Soo It was not Driver problem what i thinked, its an Fanalab problem , Please fix it
I also had the issue already even in the previous version. They would have a look at it. Currently I don't have access to my Fanalab customgames.xml but if you already had other custom games you can also just edit the xml, copy and paste it +1 the id and set there the right name, paths and exe.
Hi, I downloaded and installed Fanalab for the very first time (I did install it when it first came out, but it got too technically overwhelming for me then) So is there a beginner's page like an intro around? Thanks ;)
Is there any way to get it working before it's fully supported? My rim LEDs are picking up the game revs, because it's moving up and down. Just the range is quite far out.
First off all, all this is amazing! They work you people do to help us out is amazing. Quick question from a iRacing noob though, I understand most of what to do when it comes to profiles and so on. Recommended FFB settings for DD1 iRacing is 90%, My question is, when i am going to drive the Formula Vee, i should change that to 60% x 1.25 as in the profile made by Maurice in the Fanatec tuning right? So 70% FFB, not 90% as in the default and ofc 30 / 15 Nm ingame. Other one is, the vee profile says Peak in fanatac, sohpuld i also switch that to Peak ingame or keep it at linear? Thank you for all the help!
I am having an issue with Fanalabs opening the splash screen. Displaying Fanalabs page for a couple of seconds and then closing. While its open, I can see that it is not detecting my device. Everything worked perfectly fine before latest driver update. I cannot use telemetry with my tablet for Fanatec dashboard. I also cannot control the display or LED's on my Podium Endurance module or LED's on my Formula CS v2.
I have upgraded to latest Fanatec Controller (454) and latest Fanalabs (2.01.12)
Comments
Hi, could anyone share an AC RSS Formula Hybrid 2023 profile? For DD1/2 would be perfect.
One thing also, I find that with the recommended settings for AC, this F1 car, is way softer than any car on ACC. Is it normal? is because it does not have a custom profile? Thanks.
I have a DD1.
Has anyone had any success with the CSW 2.5 and having the Fanatec app work with this version? I am now getting a blank ip address when right clicking on the tray icon. I can see the ip address of my PC when it auto-discovers, but have not been able to get anything to work with iRacing
Please report issues with the app in the respective thread as its not FanaLab related.
The current TrayApp version v0.43.0.21 is known to not get telemtry data in iRacing. Its under investigation and will be fixed hopefully with the next version.
Hey guys, I updated to this latest fanalab + latest drivers and have a couple of issues:
1) On the IOS app, the shift light used to turn blue when hitting 100%, but now it doesn't do it anymore. Anyway to fix that?
2) I used to have FLAG LEDs in the LED tab in fanalab. Was this featured deleted?
3) On my Porsche steering wheel (DD1), I used to be able to control the flashing of the LEDs (set to %) when hitting close to 100%, but now it seems to flash super quickly when hitting rev limiter even if I put a 750ms flashing interval. Any ideas?
Thanks!
Can we get RennSport added to the game detection in FanaLab?
Once it's fully released, sure
Hello Maurice
Tried to add BeamNG as a custom game to Fanalab. Tried the exe file launch and detection method, but when I press the add button the dialog just closes and the custom game does not appear. is there a trick to this or does Fanalab not recognise BeamNG as a game title?
Hey guys,
I have a problem with the activated OSD of GPU Tweak III since this fanalab version. I use the OSD of GPU Tweak III to display some parameters of my 4070 in iRacing. When the OSD switch is "ON" I can start fanalab normally, but as soon as try to move the window, try to resize it or switch through the tabs, fanalab crashes immediatly. When I turn off the OSD switch in GPU Tweak III, fanalabs is working as usual.
I tried this with all other apps I'm using, but only fanalab is crashing with activated OSD in GPU Tweak III.
Logfiles are attached.
My Fanatec ClubeSport Pedals V3, just stopped vibrating after this update with ACC, I went and set up it again, but still no vibration anymore....
Did anyone had the same issue?
I went back to 1.69 and it works perfectly right away. The only annoying part is that that random crash after while where it just stop working.
I just updated fanalab and now I have a problem. I use screen resolution 4K 3840x2160 and newest fanalab doesnt fit to that, I can't see lower part of window, so I cant click "load" button game profile. I tried to set larger resolution of screen then drag lower part of window, but it looks that its impossible, I can make it only bigger, but I cant make it smaller. Old version worked with that resolution.
Maurice, I did recent reformat and installed newest driver version along with newest Fanalab. I followed usual settings regarding .xml to have car recognized when I pick it and profile changed. For some reason it does not seem to work for me now. Any idea how I can trouble shoot this, would greatly appreciate.
Hello, I Have problems With CSL Universal hub v2, I Updated the Fanalab and the LED Page is now empty, and the leds are not working on my CSL Universal Hub. I switched back to the prev. version witch was 2.00.09 and now is working. Soo It was not Driver problem what i thinked, its an Fanalab problem , Please fix it
I also had the issue already even in the previous version. They would have a look at it. Currently I don't have access to my Fanalab customgames.xml but if you already had other custom games you can also just edit the xml, copy and paste it +1 the id and set there the right name, paths and exe.
Hi, I downloaded and installed Fanalab for the very first time (I did install it when it first came out, but it got too technically overwhelming for me then) So is there a beginner's page like an intro around? Thanks ;)
This will be fixed in the next version.
Thanks, YouTube has answered 😁
Is there any way to get it working before it's fully supported? My rim LEDs are picking up the game revs, because it's moving up and down. Just the range is quite far out.
No.
This will be fixed in the next version.
Well, no one had this issue with ACC?
First off all, all this is amazing! They work you people do to help us out is amazing. Quick question from a iRacing noob though, I understand most of what to do when it comes to profiles and so on. Recommended FFB settings for DD1 iRacing is 90%, My question is, when i am going to drive the Formula Vee, i should change that to 60% x 1.25 as in the profile made by Maurice in the Fanatec tuning right? So 70% FFB, not 90% as in the default and ofc 30 / 15 Nm ingame. Other one is, the vee profile says Peak in fanatac, sohpuld i also switch that to Peak ingame or keep it at linear? Thank you for all the help!
On fanlab versions 2.XXX the rumble on Pedals V3 doesn't Work.
I've returned to 1.69.7 and works again.
With the latest driver 454 & latest firmware 1.35
How are the pedals connected?
Working perfectly fine for me so there must be more to it.
By USB. I've tried on usb 2.0 and 3.0.
The game is AC Competizione.
On Fanatec Control Panel test, works ok on any fanalab version, but no in game.
Ok, can confirm for USB pedals.
Forwarded to the dev, hopefully fixed in the next version.
Oh, thanks, I'm not alone in it
You need to add Fanalab.exe to the Blacklist.
OK, I hope. Thanks!
Hello,
I am having an issue with Fanalabs opening the splash screen. Displaying Fanalabs page for a couple of seconds and then closing. While its open, I can see that it is not detecting my device. Everything worked perfectly fine before latest driver update. I cannot use telemetry with my tablet for Fanatec dashboard. I also cannot control the display or LED's on my Podium Endurance module or LED's on my Formula CS v2.
I have upgraded to latest Fanatec Controller (454) and latest Fanalabs (2.01.12)
I have attached my error logs.
Hopefully someone can help me
Please upload the Logs and also Windows Event files.
Whatever you have attached are not the Logs.