in your recommend settings for the gt dd pro 8nm, you recomend to Set FF max torque to 5. ca I assume That I have the full 8nm in Peak with that Setting?
I know there aren't any official GT7 settings for the DD+ recommended but what would people suggest as a starting point for wheel settings and in game settings?
NDP 10-14 - too much will dull the feeling, too little get oscilation
NFR 15-18 some friction for a more real feeling
NIN 4-10 some weight for a more real feeling
INT 7-10 - too low its noisy, not adding information. Too high is smoothing out the detail
FEI 90
FOR 90
SPR 100 - not used in GT7
DPR 100 - not used in GT7
BLI 80 - ABS Vib setting for CSP V3 - not a game feature
BRF 73 - Force level for CSPV3
in game torque 3, no higher than 5 it clips
sensitivity 7 - this is the speed the game reacts to sudden inputs, very subtle, so higher a quick input gives a quick response. lower a less quick reponse. Won’t notice with gradual turning of the wheel
That was no change and is no issue. You are just in the Standard Tuning Menu with limited settings and ranges. This was shown to you in a popup during the update process which you could not skip for 10 seconds. Apparently you did not read that popup. It would have explained to you how to get back into the Advanced Tuning Menu with all the settings and ranges by pressing and Holding the Tuning Menu Button for 3 seconds while being in the Tuning Menu.
Comments
No.
Any ETA on this?
FFS is still PERK on DD+?
Hello Maurice,
in your recommend settings for the gt dd pro 8nm, you recomend to Set FF max torque to 5. ca I assume That I have the full 8nm in Peak with that Setting?
Is there no official setting for GT DD EXTREME yet?
No.
@Maurice
I know that things are crazy at Fanatec right now, but any idea when there might be?
Hi Guys,
What are now the best settings for GT DD pro 8nm with the formula f1 wheel?
Many Thanks in advance !!
Hi Guys,
What are now the best settings for GT DD pro 8nm with the formula f1 wheel?
Many Thanks in advance !!
I know there aren't any official GT7 settings for the DD+ recommended but what would people suggest as a starting point for wheel settings and in game settings?
Thanks - Nick
Hi Nick, I just got the steering wheel. I tested these settings.
Wheel :
On GT7 :
Paramètres > Paramètres de manette > Retour de force :
Meryll
my DD+ GT 7 settings - ranges are to taste
FFB 80-90
NDP 10-14 - too much will dull the feeling, too little get oscilation
NFR 15-18 some friction for a more real feeling
NIN 4-10 some weight for a more real feeling
INT 7-10 - too low its noisy, not adding information. Too high is smoothing out the detail
FEI 90
FOR 90
SPR 100 - not used in GT7
DPR 100 - not used in GT7
BLI 80 - ABS Vib setting for CSP V3 - not a game feature
BRF 73 - Force level for CSPV3
in game torque 3, no higher than 5 it clips
sensitivity 7 - this is the speed the game reacts to sudden inputs, very subtle, so higher a quick input gives a quick response. lower a less quick reponse. Won’t notice with gradual turning of the wheel
My recent firmware update removed NDP, NFR, NIN and INT from my Podium F1 wheel settings. Is this intentional?
That was no change and is no issue. You are just in the Standard Tuning Menu with limited settings and ranges. This was shown to you in a popup during the update process which you could not skip for 10 seconds. Apparently you did not read that popup. It would have explained to you how to get back into the Advanced Tuning Menu with all the settings and ranges by pressing and Holding the Tuning Menu Button for 3 seconds while being in the Tuning Menu.